Common faults and simple maintenance of powder packaging machine
Although the powder packaging machine is a representative of high-tech packaging machines, it has the characteristics of stable safety, high precision and long life, but it is a machine after all, so in daily work, physical errors such as personnel operations will still cause the powder packaging machine. However, it is impossible for the after-sales service personnel to solve the common faults of the powder packaging machine every time, because this will not only delay the efficiency of the packaging process, but also may miss the best time for maintenance. First of all, if the packaging material is pulled off, it may be because the packaging material has wire ends or burrs, and the paper feed proximity switch is damaged. At this time, the unqualified packaging material should be removed and the proximity switch should be replaced with a new one; and the bag should be sealed on the basis of qualified packaging materials. It is not tight because the sealing temperature is low, and the heat sealing temperature should be increased after inspection; if the sealing path is not correct, the position of the bag cutting should be readjusted, and the position of the heat sealer and the electric eye should be readjusted; the non-operation of the pulling motor may be caused by line failure, switch damage and automatic packaging. If there is a problem with the machine controller, it is necessary to check the circuit and replace it with a new switch to replace the automatic packaging machine controller. Finally, the loss of control of the machine is caused by line failure, broken fuse, and debris in the former. Check the line and replace the fuse in time. , Clean the former. Correct maintenance of the powder packaging machine can not only make us more convenient in the process of use, but also reduce unnecessary losses. Because the use of various powder packaging machines is becoming more and more important in the market, its maintenance and maintenance is particularly important. Simple maintenance of common faults of powder packaging machines is the key to ensuring the normal operation of the equipment, effectively improving packaging efficiency, ensuring packaging quality, and greatly extending the service life of powder packaging machines and improving the efficiency of enterprises.