How to maintain the filling machine daily?
For now, the importance of the filling machine in people's lives is self-evident, so are you using the filling machine in the process of using it? On the positive side, it can not only increase the rate, but also extend the service life of the filling machine to a certain extent. Therefore, paying more attention to the details in daily use will ensure the durability of the equipment and increase the work efficiency. Maintenance tips are as follows:1. Its cleanliness is a problem that we must pay attention to. The filling container used must be strictly inspected and cleaned, so that the edible oil we fill can ensure its safety. In addition to cleaning, it is of course necessary to keep the filling workshop clean and tidy. Because it is taboo in the production process that the production line cannot operate normally due to the quality of the filling machine itself, it is necessary to pay attention to sterilization and ensure cleanliness when using the meat sauce filling machine and jam filling machine.2. Keep the pipes of the filling machine clean. All pipes, especially the pipes in direct or direct contact with the sauce, should be kept clean. They should be scrubbed every week, water should be taken every day, and sterilized each time; The sauce tank should be brushed and sterilized to ensure that there is no dirt and bacteria in the part that comes into contact with the oil.3. Observe the moisture filter and oil mist device of the pneumatic combination two-piece every day. If there is too much water, it should be removed in time, and the oil level should be refueled in time;4. During production, always observe the mechanical parts to see whether the rotation and lifting are normal, whether there are abnormalities, and whether the screws are loose;5. Check the ground wire of the equipment frequently, and the contact requirements are reliable; clean the weighing platform frequently; check whether the pneumatic pipeline is leaking, and whether the air pipe is broken. 4. Change the lubricating oil (grease) of the reducer motor every year, check the tightness of the chain, and adjust the tension in time.6. If it is not used for a long time, empty the material in the pipeline.7. Do a good job of cleaning and sanitation, keep the surface of the machine clean, frequently remove the accumulated material on the scale body, and pay attention to keeping the electric control cabinet clean.8. The sensor is a high-precision, high-sealing, high-sensitivity device. Impact and overload are strictly prohibited, and no contact is allowed during the working process, and no disassembly is allowed for non-maintenance.