Industry News

Home / News / Industry News / How to maintain the powder packaging machine?

How to maintain the powder packaging machine?


The advanced automation model not only effectively improves the production efficiency of the enterprise, but also better guarantees the packaging quality of the products. However, there are often many companies that do not yet understand the importance and maintenance methods of machine maintenance. The powder packaging machine must pay attention to daily maintenance and maintenance, because this can not only prolong the service life of the equipment, but also the equipment itself will not fail and so on. For the maintenance of powder packaging machine, here are some suggestions for you:

1. Lubrication with oil: It is necessary to regularly lubricate the meshing parts of the gears, the oil-filling holes of the bearing with seats, and the moving parts for lubrication. Once per shift, the reducer is strictly prohibited from running without oil. When adding lubricating oil, be careful not to put the oil tank on the rotating belt to prevent slippage and loss or premature aging of the belt and damage.

Another point to note is that the reducer must not be operated when there is no oil, and after the first 300 hours of operation, clean the interior and replace with new oil, and then change the oil every 2500 hours of operation. When adding lubricating oil, do not drip oil on the transmission belt, because this will cause the powder packaging machine to slip and lose or prematurely age and damage the belt.

2. Frequent cleaning: After the shutdown, the metering part should be cleaned in time, and the heat-sealing device body should be cleaned frequently, especially for some packaged materials with high sugar content in the granules, the turntable and the feeding door should be cleaned, and the heat-sealing device body should also be cleaned. The parts that are cleaned frequently to ensure the clear sealing lines of the packaged products, the scattered materials should be cleaned up in time to facilitate the cleaning of the parts, so as to better prolong their service life, and at the same time clean the dust in the electric control box frequently. To prevent electrical failures such as short circuits or poor contact.

3. Maintenance of the machine: Maintenance of the powder packaging machine is the key to prolonging the life of the packaging machine, so it is necessary to check the screws of each part of the powder packaging machine frequently, and there must be no looseness. Otherwise, it will affect the normal remote rotation of the whole machine. The electrical parts should pay attention to waterproof, moisture-proof, anti-corrosion, and rat-proof to ensure that the electric control box and the terminals are clean to prevent electrical failures. Burn the packaging material.