The accessories of the paste quantitative filling machine are composed of:
1. Filling head, the size and length of the filling head can be customized according to the size of the paste quantitative filling machine, which is suitable for filling bottles of different sizes.
2. The quantitative paste filling machine with Powder packing machine PLC control system is suitable for materials with different viscosities and particles, and can solve various pressure problems caused by high-level and ultra-high pressure feeding.
3. In the material box, in order to ensure the stable performance of the filling operation, the liquid level of the liquid storage tank must always maintain a certain height. It can be avoided that when the air volume in the liquid storage tank is reduced, the air pressure is low, and the liquid level is too high, the high liquid level float will open the intake valve due to rising. The pressure gas is poured into the valve hole to supplement the gas volume, and the liquid level is lowered to ensure that the liquid level does not exceed the limit.
4. On the contrary, when the volume of gas in the liquid storage tank increases and the air pressure is too high, the liquid level is too low, the low-level float will open the exhaust valve due to the drop to remove excess gas and make the liquid level rise. , so as to ensure that the liquid level of the paste quantitative filling machine is not lower than the lower limit. In order to avoid sudden depressurization and foam generation when filling gas-containing liquid materials, the filling operation process is fluctuated and chaotic.
The paste filling machine is divided into semi-automatic paste filling machine and full-automatic paste filling machine, with different usage requirements, usually divided into single-head paste filling machine and double-head paste filling machine. Customers can choose corresponding equipment for different production needs, but in any case, the maintenance and maintenance of equipment are basically the same. The body of the paste filling machine is made of stainless steel. When cleaning, do not scrape its outer surface with sharp and hard tools. Use alcohol to scrub the surface stains.
Secondly, the cylinder of the equipment has been lubricated before leaving the factory, please do not disassemble the cylinder or add any lubricating oil, and the material cylinder, stainless steel three-way and three-way steering valve of the equipment can be easily disassembled and washed. After that, the wearing parts of the equipment should be dealt with in time, and the worn sealing rings should be replaced in time.
Paste quantitative filling machine is suitable for food, daily chemical, pesticide, pharmaceutical and special industries. The filling accuracy will be affected by the stability of the air pressure, the uniformity of the material, the filling speed, etc.