In recent years, my country's Powder packing machine industry has developed rapidly and the situation is good. Filling machines are an indispensable part of the packaging industry. Among them, weighing filling machines are relatively common in filling machinery. A small classification of machinery, the filling machine is mainly composed of empty barrel conveying rollers, nitrogen filling equipment, feeding equipment, weighing equipment, solid barrel conveying rollers, electronic control system pneumatic capping machine, filling pipeline, etc. combined. The filling machine has a large scale in the production workshop, a large amount of labor, and a long operation time. Many problems are prone to occur after long-term use.
Therefore, the maintenance of the filling machine is more critical. Learning to perform regular maintenance on the filling machine is equivalent to increasing the service life of the weighing filling machine
Check the pneumatic combination filter and oil mist filter every day before going to work. Once the water is too much, it should be dealt with in time. Once the oil level is not enough, you should refuel in time; during the production process, you should check whether the rotation and lifting of the mechanical parts are normal, whether there is any abnormality, and whether the screws are loose; check the equipment wire connectors on time, and the contact is reliable; Heavy platform; check whether the pneumatic line is leaking and whether the air line is damaged.
Replace the lubricating oil (grease) of the motor reducer every year, check the tightness of the chain, and adjust the tension in time. Once it is not used for a long time, the materials in the pipeline should be completely removed. Be clean and hygienic to ensure that the surface layer of the machine is clean, always handle the materials stacked on the scale body, and pay attention to keeping the electrical control cabinet clean. The controller is a device with high precision, high sealing and high sensitivity. Shock and overloading are prohibited. Do not touch during work, and do not disassemble for unauthorized maintenance.