Industry News

Home / News / Industry News / Automatic powder packaging machine maintenance and maintenance

Automatic powder packaging machine maintenance and maintenance


In recent years, my country's powder packaging machine market has maintained rapid growth. According to market analysis, the main reason why the market has received so much attention is that the Chinese market share is taking up an increasing proportion of its global market share, which is a good development opportunity for powder packaging machine companies .
At present, whether it is food or medicine, daily chemical industry. Powder packaging machines are widely used, and powder packaging machines are constantly improving themselves on the basis of the past, aiming at humanized operation, focusing on the perfect combination of product quality and appearance, and making great contributions to my country's powder packaging machines.
After purchasing a powder packaging machine, you should also pay attention to its daily maintenance and maintenance in order to ensure the normal operation of the equipment and prolong the service life of the equipment. Here are some problems that need to be paid attention to in the maintenance of the powder packaging machine:

1. Lubrication work
It is necessary to regularly lubricate the meshing parts of its gears, the oil filling holes of the bearing with seats and the moving parts. Once per shift, the reducer is strictly prohibited from running without oil. When adding lubricating oil, be careful not to rotate the oil tank. on the belt to prevent slippage and loss or premature aging of the belt and damage.
2. Maintenance work
Before using the powder packaging machine, it is necessary to check the screws of all parts, and there must be no looseness, otherwise, the normal operation of the whole machine will be affected. In order to ensure that the inside of the electric control box and the wiring terminals are clean to prevent electrical failures, after shutdown, the two hot air heaters should be in the open position to prevent the packaging materials from being scalded.
3. Cleaning work
After the equipment is shut down, the metering part should be cleaned in time, and the hot air body should be cleaned frequently to ensure that the sealing lines of the packaged products are clear. To prolong the service life, colleagues should also clean the dust in the electric control box frequently to prevent electrical failures such as short circuit or poor contact.